Javan Steel, Exclusive Distributor ofHonsberg Band Saw Blades
SINUS TAP 800100
Honsberg Tungsten Carbide Band Saw Blade SINUS TAP 800100
SINUS TAP 800100 tungsten carbide band saw blade with proven ~4% high chrome alloyed tenacious backing material and a carbide tipped, diamond ground tooth edge. The theeth hardness is 1600HV.Suitable for dual column band saw machines.
- Materials
- Shapes
- Machines
- Structural, Deep Drawing and Machining Steels
- Structural, Quenched and Tempered Steels
- Case Hardened, Quenched and Tempered Steels
- Low Alloyed Hot-Working Steels
- Nitriding Steels, High Alloyed Hot Working Steels
- Unalloyed Tool Steels
- Cold Work Steels
- High-Speed Steels
- Rust and Acid Resistant Steels (Light)
- Rust and Acid Resistant Steels (Heavy)
- Duplex and Heat Resistant Steels
- Nickle-base Alloys
- Cooper
- Aluminium Bronze
- Titanium Alloys
Tooth Profile
Trapezoid Tooth TAP
Positive cutting angle and sectional chipping zonessuitable for:
Optimized surface finishes, optimized hig cutting performance
Versions
| Size | Teeth Per Inch (tpi) | |||||
|---|---|---|---|---|---|---|
| mm | Inches | 0.85/1.15 | 1.1/1.6 | 1.5/2 | 2/3 | 3/4 |
| 27 x 0.9 | 1 1/16 x .035 | TAP | TAP | |||
| 34 x 1.1 | 1 3/8 x .042 | TAP | TAP | |||
| 41 x 1.3 | 1 5/8 x .050 | TAP | TAP | TAP | ||
| 54 x 1.3 | 2 1/8 x .050 | TAP | TAP | TAP | TAP | |
| 54 x 1.6 | 2 1/8 x .063 | TAP | TAP | TAP | TAP | |
| 67 x 1.6 | 2 5/8 x .063 | TAP | TAP | TAP | ||
| 80 x 1.6 | 3 1/8 x .063 | TAP | TAP | |||