Honsberg Band Saw Blades

Javan Steel, Exclusive Distributor ofHonsberg Band Saw Blades

SPECTRA A 700720

Honsberg Bimetal Band Saw Blade Honsberg SPECTRA A 700720

Honsberg Bimetal Band Saw Blade SPECTRA A 700720

SPECTRA A 700720 bimetal band saw blade made of ~4% high chrome alloyed backing material and HSS cutting edge made of HSS M42 (material No.1.3247) with cobalt content. The theeth hardness is 68HRc.
Suitable for dual column, horizontal and vertical band saw machines.
  • Structural, Deep Drawing and Machining Steels
  • Structural, Quenched and Tempered Steels
  • Case Hardened, Quenched and Tempered Steels
  • Low Alloyed Hot-Working Steels
  • Nitriding Steels, High Alloyed Hot Working Steels
  • Unalloyed Tool Steels
  • Cold Work Steels
  • High-Speed Steels
  • Cast Iron
  • Rust and Acid Resistant Steels (Light)
  • Rust and Acid Resistant Steels (Heavy)
  • Duplex and Heat Resistant Steels
  • Aluminium
  • Cooper
  • Brass
  • Aluminium Bronze

Tooth Profile

Hook Tooth K

Rake 10° angle positive suitable for:
Universal use, profiles and solid materials, non-ferrous metals and steels

Standard Tooth S

Cutting angle 0° Suitable for:
Thin-walled profiles, short-chipping materials , steels with a high carbon content, materials with small cross-sections, cast iron

Versions

Size Teeth Per Inch (tpi)
mm Inches 1.25 2 3 3 4 4 6 6 8 10 14 18
6 x 0.6 1/4 x .025                K        
6 x 0.9 1/4 x .035                K    S  S  
10 x 0.6 3/8 x .025                K  S      
10 x 0.9 3/8 x .035                K  S  S  S  
13 x 0.6 1/2 x .025                K    S  S  S
13 x 0.9 1/2 x .035        K    K    K  S  S  S  
20 x 0.9 3/4 x .035        K    K    K      S  S
27 x 0.9 1 1/16 x .035    K  S  K  S  K  S  K  S  S  S  
34 x 1.1 1 3/8 x .042 K  K  S  K  S  K  S  K  S  S    
41 x 1.3 1 5/8 x .050 K  K    K    K            
54 x 1.3 2 1/8 x .050 K                      
54 x 1.6 2 1/8 x .063 K  K                    
67 x 1.6 2 5/8 x .063 K  K