Beka-mak Bandsawing Machines

Javan Steel, Exclusive Distributor ofBeka-Mak Band Sawing Machines

BMSO 360 C

Automatic Twin Pillar Band Sawing Machine - Beka-mak BMSO 360 C
Automatic Twin Pillar Band Sawing Machine Beka-mak BMSO 360 C

Beka-mak BMSO 360 C
Automatic Twin Pillar Band Sawing Machine

Fully automatic Linear Way for cutting solid stocks,tubes and profiles of steel , cast-iron light and non ferrous material for cutting at only 90deg. Complete steel fabricated.
The rear jaw contains of a number of hardened rollers driven through a worm and wheel by an electric motor. The front vice consist of a number of free running rollers. A limit switch assemebled on top the vice stops the machine when the block is exhausted.
Once the work piece is clamped between the rollers no further clamping needed. The work is fed through the vice to the bar stop which contains a micro-switch controlling the bar feed motor. A piece counter controls the number of the cuts. The machines stop automatically at the blade breakage.
The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies.
Bimetal saw blade and 1,2 meters infeed roller table are supplied as standard.

Standard Features

  • Saw Blade 34
  • Control Panel
  • Hydromecanic Blade Tension
  • Hydraulic Vice
  • Mechanic Top Clamping
  • Synchronisation Movable Arm/Vice
  • 1,2 Mt Material Roller Table
  • Siti Gearbox
  • Pressure Adjustment
  • Optical Height Adjustment
  • Material Limit Shaft
  • SAP Coolant Pomp
  • Lineer Way
  • Security Switch
  • Saw Blade Brush
  • Inverter

Optional Features

  • Chip Conveyor
  • ILC Microspray Device
  • Hydraulic Blade Tension
  • 3 Mt Material Roller Table

Technical Details

Parameter Unit Value
Height mm 1660
Width  mm 950
Length  mm 2900
Weight kg 1342
Working Height  mm 590
Band Dimensions  mm 4800x34x1.1
Cutting Speeds m/min 20-100
Coolant Pump kW 0.12
Feed Motor kW 0.25
Chip Conveyor Motor kW 0.25
Hydraulic Motor kW 0.55
Main Drive Motor kW 3
Cutting Capacity (mm)
Cutting Angle
380 430x380 380