Javan Steel, Exclusive Distributor ofBeka-Mak Band Sawing Machines
BMSO 230
Beka-mak BMSO 230
Automatic Horizontal Band Sawing Machine
Fully automatic band saws for cutting solid stocks, tubes and steel profiles, cast-iron light and non-ferrous material. Only 90deg cut. Complete steel fabricated.Reduction gear in oil bath and 5 different speed adjusted by a stepped pulley, carbide pads and rollers in the blade guides.
The front jaw contains of a number of hardened rollers driven through a worm and wheel by an electric motor. The rear vice consist of a number of free running rollers.A limit switch assemebled on top the vice stops the machine when the block is exhausted.
Once the work piece clamped between the rollers no further clamping needed. The work is fed through the vice to the bar stop which contains a micro-switch controlling the bar feed motor. A piece counter controls the number of the cuts.
The machines stop automatically at the blade breakage. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies.
Bimetal saw blade and 1,2 meter infeed roller table are supplied as standard.
Standard Features
- SAP Coolant Pump
- Material Length stop
- Security Switch
- Mechanic Top Clamping
- Control Panel
- Height Adjustment Switch
- Hydromecanic Blade Tension
- Saw Blade 27
- 1,2 Mt Roller Table
- Saw Blade Brash
Optional Features
- 3 Mt Material Roller Table
- Inverter
- ILC Microspray Device
Technical Details
| Parameter | Unit | Value | |
|---|---|---|---|
| Height | mm | 1500 | |
| Width | mm | 800 | |
| Length | mm | 1700 | |
| Weight | kg | 530 | |
| Working Height | mm | 590 | |
| Band Dimensions | mm | 2730x27x0.9 | |
| Cutting Speeds | m/min | 35-70 | |
| Coolant Pump | kW | 0.12 | |
| Feed Motor | kW | 0.25 | |
| Hydraulic Motor | kW | 0.37 | |
| Main Drive Motor | kW | 1-1.3 | |
| Cutting Capacity (mm) | |||
| Cutting Angle |  |
 |
 |
| 0° | 230 | 240x230 | 230 |